产品展示

产品展示

current position: Home > Product Center > Waste gas treatment
PP main air duct

PP main air duct

  • Category:Waste gas treatment
  • Browse number:
  • QR code:
  • Release time:2026-01-18 10:19:03
  • Product description

PP main air duct is mainly made of galvanized steel plate as the main raw material, which is formed through biting and mechanical processing. It is convenient for on-site production and has designability. It is a traditional ventilation and air conditioning duct. With the development of technology, it has changed from manual production to fully mechanized production, with advantages such as high efficiency and precise processing size.


Regulations for the production of ventilation ducts

1. General provisions:

Before making air ducts, it is necessary to check whether the materials used meet the quality requirements and whether there is a factory certificate of conformity or quality appraisal document. If there are no such supporting documents, a visual inspection should be conducted and the following requirements should be met:

(1) The surface of the board should be flat, the thickness should be uniform, there should be no protrusions or obvious pressure damage, and there should be no cracks, sand holes, scars, burrs, or rust;

(2) Steel sections should be of equal shape, uniform, and free from cracks, bubbles, cavities, and other defects that may affect quality;

(3) Other materials should not have defects that result in a decrease in the strength of the finished product or affect its performance.

2. The surface of the air duct and accessories should be smooth, the arc should be uniform, and the longitudinal joints should be staggered; The bite joint should be tight and of uniform width. The weld seam should undergo visual inspection and should not have defects such as pores, sand holes, slag inclusions, cracks, etc. The deformation of the steel plate after welding should be corrected.

3. The allowable deviation for the outer diameter or outer length of metal ducts and fittings is -1mm if it is less than or equal to 300mm; Greater than 300mm is -2mm. The allowable deviation for the inner diameter of circular flanges or the inner edge size of rectangular flanges during flange production is+2mm, and the unevenness should not exceed 2mm.

4. All right angle bends in the air duct system are equipped with soundproof elbows, which are fitted with galvanized iron plate guide vanes.

 

Core Features

1. Corrosion resistance

Polypropylene material has excellent stability and can withstand corrosion from various corrosive media such as acid, alkali, salt, organic solvents, etc. It will not cause rusting, corrosion, aging and other problems, especially suitable for transporting corrosive gases such as electroplating acid pickling waste gas, chemical acid alkali waste gas, coating organic waste gas, etc.

2. Lightweight and high-strength, easy to install

The density of PP main air ducts is only about 1/7 of steel, making them lightweight and easy to transport and lift; At the same time, it has good mechanical properties, strong compressive and impact resistance, and can be cut and spliced according to on-site needs, greatly reducing installation costs and construction cycles.

3. Good sealing and leakage prevention

By using hot melt welding or flange connection technology, seamless sealing can be achieved at the interface, which can effectively prevent exhaust gas leakage and prevent unorganized emissions from causing harm to the factory environment and personnel health.

4. Moderate temperature resistance

The applicable temperature range is -10 ℃~80 ℃, which can meet the transportation needs of most industrial waste gases (at room temperature or medium low temperature); If high-temperature gas needs to be transported, modified PP material (such as fiberglass reinforced PP) or other high-temperature resistant air ducts should be used.

5. Environmentally friendly, non-toxic, and cost-effective

PP material itself is non-toxic and odorless, and will not release harmful substances to contaminate the medium; And the procurement cost is lower than that of fiberglass ducts and stainless steel ducts, with simple maintenance in the later stage and a service life of up to 8-15 years


Advantage Comparison

Type of air ductCorrosion resistanceWeightInstallation difficultyMaintenance costLimitations of Applicable Scenarios
PP main air ductAcid alkali saltLightLow, can be welded on siteLow, no need for rust and corrosion preventionNot resistant to high temperatures (>80 ℃ requires modification)
Galvanized iron sheet air ductPoor, prone to rustingHeavyIn the middle, flange connection is requiredHigh, regular rust prevention is requiredOnly applicable to non corrosive clean gases
FRP air ductBetterMiddleHigh, customized mold requiredMedium, prone to brittle crackingLong processing cycle, difficult to repair local damage
Stainless steel air ductBetter (requires 316L material)HeavyHigh, high welding requirementsMiddleHigh cost, still prone to corrosion in chloride ion environments



Jiangsu Jiangzhou Environmental Protection Technology Co., Ltd. is located in Yancheng City, Jiangsu Province, China, a world natural heritage site for migratory birds in the Yellow (Bohai) Sea. The company is located on Jingyi Road, Yifeng Industrial Park, Yancheng City, in the Dazonghu Tourist Resort. The company was established in 2010 with a registered capital of 30 million yuan.

We always adhere to the business philosophy of "quality first, reputation first". Through close cooperation with research institutes, new energy, semiconductor, photovoltaic solar energy, electronics, electroplating and other units, we actively adopt scientific technology and continuously research and develop new technologies and processes for wastewater and exhaust gas to improve our core competitiveness. We have a professional after-sales service team all year round to provide users with various services such as mid way maintenance, technical transformation, personnel training, etc.

We will always uphold the spirit of craftsmanship, strive to explore and forge ahead! Continuously surpassing oneself, creating the future, and contributing to the continuous improvement of China's environmental protection cause!


Engineering Achievements

Previous:Waste gas treatment2026-01-18
Next:PP branch air duct2026-01-18

Related products

  • menu