产品展示

产品展示

current position: Home > Product Center > Painting equipment
Pre treatment of spraying line

Pre treatment of spraying line

  • Category:Painting equipment
  • Browse number:
  • QR code:
  • Release time:2026-01-18 14:09:05
  • Product description

Pre spray treatment is the process of removing various surface stains (such as grease, rust, oxide scale, welding slag, dust, etc.) and forming a conversion film before spraying the workpiece, providing a clean and activated surface for subsequent coating.

Pre treatment of various oil stains (such as lubricating oil, emulsion, grease, sweat stains, etc.) and dust on the surface of the coated material before spraying line is an essential process for cleaning the coated surface; What kind of treatment (or conversion film treatment) or mechanical processing treatment (such as shot blasting treatment) should be carried out on the clean coated surface (whether or not), depending on the substrate and surface condition of the coated material, and the coating process requirements.


Processing method

The workpiece processing method refers to the way in which the workpiece comes into contact with the tank solution to achieve the purpose of pretreatment, including full immersion, full spray, spray immersion combination, brush coating, etc. It mainly depends on factors such as the geometric dimensions and shape of the workpiece, site area, investment scale, and production volume. For example, workpieces with complex geometric dimensions are not suitable for spraying methods; Oil tanks and oil drums are not easy to sink in liquids, so they are not suitable for soaking methods.


1.1 Full immersion method is a common processing method that completely immerses the workpiece in the tank solution and takes it out after a period of time to achieve the goals of oil removal, rust removal, phosphating, etc. The geometric shape of the workpiece varies in complexity, and wherever the liquid can reach, the processing goal can be achieved. This is the unique advantage of immersion method, which cannot be compared with spraying and brushing. Its drawback is that there is no auxiliary use of mechanical flushing, so the processing speed is relatively slow and the processing time is long, especially when continuously hanging and conveying workpieces. In addition to the running time of the workpiece in the groove, there is also the time for the workpiece to go up and down the slope, which increases the equipment, site area, and investment. For phosphating alone, foreign countries tend to adopt the full immersion method, which is said to easily form granular crystalline phosphating films with high iron content, and has good compatibility with cathodic electrophoresis.


1.2 Full spray method, using a pump to pressurize the liquid and form a mist at a pressure of 0.1-0.2 Mpa, spraying it onto the workpiece to achieve the desired treatment effect. Due to mechanical flushing and liquid renewal during spraying, the processing speed is accelerated and the time is shortened. The length of the production line has been shortened, resulting in a reduction in site, equipment, and shortcomings. For workpieces with complex geometric shapes, such as the inner cavity and corners, it is difficult for liquids to reach and the processing effect is not good. Therefore, it is only suitable for processing workpieces with simple geometric shapes. The spray method is also not very suitable for acid pickling and rust removal, as it can cause a series of problems such as equipment corrosion and rusting between processes. Therefore, when choosing spray acid pickling, great caution must be exercised. According to reports, full spray phosphating is prone to forming coarse crystalline branches and low iron content phosphating films, and is not recommended as a pre-treatment for cathodic electrophoretic paint in foreign countries. The full spray method is mainly used for powder coating, electrostatic coating, anodic electrophoresis, etc. of household appliances and components.


Key points for pre-treatment of different materials

Material

Special treatment

Precautions

Aluminum alloy

Degreasing → Alkali corrosion → Neutralization → Chromium free passivation → Water washing → Drying

Avoid strong acids and alkalis to prevent substrate corrosion

Galvanized sheet

Light degreasing → surface conditioning → phosphating (low zinc) → water washing → drying

Control the phosphating temperature to avoid excessive film thickness

Plastic part

Cleaning → Polishing/Flame Treatment → Activation → Primer

Enhance surface tension and strengthen coating adhesion

Stainless steel

Degreasing → Acid washing activation → Water washing → Drying

Electrolytic polishing if necessary to improve surface quality


Classification of processing methods

Category

Applicable scenarios

advantage

Chemical treatment method

Most metal workpieces

Uniform processing, suitable for complex structures, high efficiency

Mechanical processing method

Severely corroded workpieces, large structural components

No water pollution, good treatment effect

Electrochemical treatment method

Precision workpieces with high surface requirements

Defatting and rust removal are carried out simultaneously, with good results

Physical cleaning method

Light pollution workpieces, plastic parts

Environmentally friendly, easy to operate


Jiangsu Jiangzhou Environmental Protection Technology Co., Ltd. is located in Yancheng City, Jiangsu Province, China, a world natural heritage site for migratory birds in the Yellow (Bohai) Sea. The company is located on Jingyi Road, Yifeng Industrial Park, Yancheng City, in the Dazonghu Tourist Resort. The company was established in 2010 with a registered capital of 30 million yuan.

We always adhere to the business philosophy of "quality first, reputation first". Through close cooperation with research institutes, new energy, semiconductor, photovoltaic solar energy, electronics, electroplating and other units, we actively adopt scientific technology and continuously research and develop new technologies and processes for wastewater and exhaust gas to improve our core competitiveness. We have a professional after-sales service team all year round to provide users with various services such as mid way maintenance, technical transformation, personnel training, etc.

We will always uphold the spirit of craftsmanship, strive to explore and forge ahead! Continuously surpassing oneself, creating the future, and contributing to the continuous improvement of China's environmental protection cause!


Engineering Achievements

Related products

  • menu